Home > Products > Anionic Polyacrylamide > Anionic Flocculant Liquid
Anionic Flocculant Liquid
  • Anionic Flocculant LiquidAnionic Flocculant Liquid

Anionic Flocculant Liquid

Anionic flocculant Liquid is an emulsion type anionic polymer. Generally speaking, the effective content of polymer in emulsion flocculant is about 25% to 50%.

Send Inquiry

Product Description

The Anionic Flocculant Liquid is a kind of emulsified anionic polymer, its effective content of polymer is about 25% to 50%, so it has a strong adsorption bridge effect. It is easily soluble in water and can quickly remove waste particles in water. It can absorb suspended solid particles in water through polar groups in the molecular chain, so as to bridge or neutralize the particles, form large flocs, and restore the clarity of water.


This Anionic Flocculant Liquid has good performance, and can be widely used in the treatment of urban sewage, printing and dyeing, coal washing and other industrial wastewater. Its liquid viscosity is high, and it only needs less dosage to have a stable use effect, so it can effectively save economic costs and dosage. In addition, it can provide appropriate treatment in various situations, thereby reducing the resources required for proper treatment or reuse of wastewater.



Solid Content (%)


Brookfield Viscosity UI (cps)

Dissolving Time

White Emulsion








1. Before using the Anionic flocculant Liquid product series, shake it as much as possible;

2. During the dissolution operation, add this product while adding water. The dissolution concentration is recommended to be controlled at 3-5 ‰, stirred for about 10-20 minutes, and used after complete dissolution;

3. The prepared dilute solution should not be stored for a long time, and it is recommended to dissolve as soon as possible;

4. When polyacrylamide emulsion and inorganic coagulant are used together to treat wastewater, the inorganic coagulant should be added first, and when there is obvious alum bloom (usually the interval is about 30-60 seconds), add this product.


1, Operator should wear protective appliance to avoid skin touching. If so, wash immediately to rinse out.

2, Avoid spilling on the floor. In case of spillage, clean up in time to prevent slippage and injury.

3, Store it in the dry and cool place at 5°C-30°C.

Hot Tags: Anionic Flocculant Liquid, China, Wholesale, Manufacturers, Suppliers, Factory, Made in China, Free Sample

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.