Home > Products > Anionic Polyacrylamide > Anionic Polymer Flocculant And Polyacrylamide Powder
Anionic Polymer Flocculant And Polyacrylamide Powder
  • Anionic Polymer Flocculant And Polyacrylamide PowderAnionic Polymer Flocculant And Polyacrylamide Powder

Anionic Polymer Flocculant And Polyacrylamide Powder

As the professional manufacture, we would like to provide you Shuodi Anionic Polymer Flocculant And Polyacrylamide Powder. Oubo Chemical anionic flocculants are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative loads and thus anionic active properties in aqueous solutions. Our anionic polyacrylamide comes with solid powder and emulsion. The solutions of Oubo...

Send Inquiry

Product Description

As the professional manufacture, we would like to provide you Shuodi Anionic Polymer Flocculant And Polyacrylamide Powder. More than 10 years of accumulated experience, we won a good reputation in the industry!  Oubo Chemical anionic flocculants are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative loads and thus anionic active properties in aqueous solutions. Our anionic polyacrylamide comes with solid powder and emulsion.

The solutions of Anionic Polymer Flocculant And Polyacrylamide Powder must be prepared in appropriate plants fitted with dry powder feed and dispersion units and with constant and mild agitation. Dissolution water must have a temperature of between 10°C and C; for the proper use of Oubo Chemical anionic polyelectrolyte and for the best possible outcomes, a "maturation" period of 60 minutes must be required. In the handling of turbid water, flocculants must be applied to the water at a point of average turbulence in order to ensure a detailed and homogeneous mixing without impairing the development of the flock.The operational concentration recommended is 3 g/l and the operating limit is 15 g/l. Please contact the Oubo Chemical team to ensure optimal efficiency on particular uses on anionic polymer.

Usage of Anionic Polymer flocculant

1. As used, prepare a 0.1-0.3 per cent aqueous solution concentration and use neutral water that does not contain salt impurities.

2. When dissolving, spray the product uniformly in the stirred water and control the stirring speed at 100-300 rpm. Reasonable heating (< 60 °C) may accelerate dissolution.

3. Change the pH value of the processed liquid to allow polyacrylamide play its maximum function. 4.

When applying polyacrylamide solution, the mixture with the substance to be processed should be accelerated. When flocs emerge, slow down the stirring pace to promote the development of flocs and speed up settlement.

Storage of Anionic Polymer flocculant

Place in a cool, well-ventilated area, keep away from ignition sources, heat, and open flames, and store in tightly sealed containers.

Incompatible: heavy oxidizing agents.

Hot Tags: Anionic Polymer Flocculant And Polyacrylamide Powder, China, Wholesale, Manufacturers, Suppliers, Factory, Made in China, Free Sample

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept