Home > Products > Nonionic Polyacrylamide > Nonionic Polymer Flocculant And Polyacrylamide Powder
Nonionic Polymer Flocculant And Polyacrylamide Powder

Nonionic Polymer Flocculant And Polyacrylamide Powder

Nonionic Polymer Flocculant And Polyacrylamide Powder are water-soluble polymers or polyelectrolytes. Because its molecular chain contains a certain number of polar groups, it can absorb solid particles suspended in water to bridge between particles or agglomerate particles to form large flocs through charge neutralization. Therefore, it can accelerate the settling of particles in the suspension, and has a very obvious effect of accelerating solution clarification and promoting filtration.

Send Inquiry

Product Description

Qingdao Shuodi Environmental Protection Technology Co., Ltd. is a modern technology enterprise specializing in the field of environmental protection, providing pharmaceutical products and services for wastewater treatment. Mainly non-ionic polymer flocculant products. Nonionic Polymer Flocculant And Polyacrylamide Powder is a polymer compound that aggregates and settles impurity particles dispersed in the liquid phase. Such as gelatin, starch, polyvinyl alcohol, sodium polyacrylate, poly(sulfonated styrene-maleic acid), etc. It is widely used in water treatment (purification of sewage, reduction of COD, reduction of pollution, etc.) and sedimentation, filtration, clarification and other processes in other media.

Chemical properties of non-ionic polymer flocculant:

Exterior

White particle

Solid content

  ≥88%

molecular weight

2-18 million

charge density

≤5.0 (Mole%)

pH (0.1% SOL)

7.8~8.0

Water-soluble viscosity (0.1%SOL)

300~550(CPS)

Moisture

Below 10%

Residual monomer (monomer)

Below 0.2%


Use method and precautions of Nonionic Polymer Flocculant And Polyacrylamide Powder:

1. It is advisable to make a 0.2% aqueous solution with practical neutral and salt-free water.

2. Because this product is suitable for a wide range of water body pH, the general dosage is 0.1-10ppm (0.1-10mg/L).

3. Fully dissolve. Care should be taken when dissolving this product, especially the flow rate of the automatic dosing device should not be too fast to prevent the non-ionic polymer flocculant from agglomerating, fish-eye phenomenon, and unnecessary trouble caused by pipeline blockage.

4. Generally, the advisable stirring speed is 200 rpm, and the time is not less than one hour. Properly increasing the water temperature by 20-30 degrees Celsius can accelerate the dissolution. The liquid temperature should be less than 60 degrees.

5. The workplace should be washed with water frequently to keep it clean. Because of its high viscosity, the PAM scattered on the ground is smooth when it encounters water, preventing operators from slipping and causing safety accidents.

Nonionic Polymer Flocculant And Polyacrylamide Powder packaging:

Packed in 25Kg plastic-lined woven bags or paper-plastic composite bags, or according to user requirements. When storing and transporting, pay attention to heat protection, moisture protection, and prevent packaging damage. Dry powder products will absorb moisture and agglomerate if left exposed for a long time. Stacking layers shall not exceed 20 layers.

Validity period of non-ionic polymer flocculant:

The effective storage period is 2 years.

Hot Tags: Nonionic Polymer Flocculant And Polyacrylamide Powder, China, Wholesale, Manufacturers, Suppliers, Factory, Made in China, Free Sample

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept